Fork Extensions

Fork Extensions provide a simple, but effective method of handling the occasional long and awkward load that extends past the tips of the parent fork arm (maximum overhang 50%).

Carriage Mounted Poles

Suitable for a variety of applications when the lifting and repositioning of a coiled product is required such as fabric, carpets, paper rolls, linings. Fitted directly onto the carriage of the forklift, thus maintaining the truck optimum lifting capacity.

Access Platforms

Our range of Access Platforms provide a safe environment for a wide range of maintenance and inspections to be carried out from, with the reassurance that they have been manufactured in accordance with HSE document PM28 3rd Edition.

Fork Mounted Jib

When height is not at a premium, but maximum lift capacity is critical, the Fork Mounted Jib allows the movement of long and awkward loads from inaccessible locations with the potential of 4 different lifting centres.

Carriage Mounted Jib

When dedicated lifts are needed on a regular basis the Carriage Mounted Jib delivers the perfect substitute to an overhead crane or static floor mounted Jib Arm, with the added benefit of a reduced lost load centre and centre of gravity.

Fork Mounted Drum Lifter

The Fork Mounted Drum Lifter provides a simple yet effective method of moving steel drums in a safe and controlled manner which is aimed at the small to medium volume drum user.

Fork Mounted Sweeper - 'The Basil'

The Fork Mounted Sweeper is a quick and easy solution for reheaping your loose granule products such as sand, top soil, grain or similar. Optional left and right hand sweep gives you the versatility of clearing your yard, roadway footpaths or warehouse.

Combi Skip

Designed to simplify the holding, movement and disposal of material in confined areas with the unique '4 way entry' base . The skip is supplied as manual operation as standard, but automatic tipping at high level can be achieved by ordering the conversion kit allowing the forklift driver to empty the skip without leaving the safety of his seat.

*Add 205mm to height to give overall skip height

Multi Purpose Scoop

Multi purpose Scoops are an ideal alternative to a loading shovel allowing your forklift to become amore universal asset. Ideal for the movement or loading of loose materials such as sand, gravel, top soil or similar.

In the brick and block clamp attachment market the word standard does not exist. Although on the face of it handling this type of product would seam quite a straight forward prospect the truth is the choice is extensive. The reason for this are often down to user preference, and within the range more than a single attachment may answer all your needs, i.e. Function, Specification & Price.

• Overhead

  

  The overhead brick and block section includes parallel slide action clamps, as well as scissor in both hydarulic and non hydraulic form. 

  >All overhead clamping requirements

  click for more information

• Side Clamping

  

  This section features a range of dedicated side clamping attachments. These units are designed with options for integrated load guards and arm cages. There simple and robust slide bar construction makes them cost effective,low maintenance and long life solutions.

   

  > Side Clamping

  > Require simple cost effective solution.

  > See also clamp units section for load clamps with block clamp arms for less arduous applications.

  click for more information

• Brick Tine

  

  This catergory offers a selection of attachments designed for handling brick packs through voids left in the stack.

  It includes those for banded packs i.e. our Plain Tines, this is usually used for handling smaller packs of bricks through the voids left for forks, but enables multiple packs width wise. This section also includes those devices used for handling the hollow clay bricks.

  It also offers a range of hydraulic tines whicn enable a loose pack of bricks to be handled from a kiln. This attachment features a tine which picks the individual bricks off the bottom layer as well as the pack above.

   

  You don't want to clamp on the sides of the pack.

  Handling through voids left in the pack configuration.

  click for more information

• Brick Sideshift

  

  Brick side-shifts operate in the same way as triple side-shifts, however they feature a more robust chassis designs and can be specified with any number of forks for carrying multiple brick and block packs at once. They all feature consolidation and side-shift as standard, but can also feature hydraulic fork positioning on each head, as well as retractable forks. The standard range offers four and eight fork units.

   

  > Handling multiple banded packs through fork apertures

  > Require pack consolidation.

   

Our rotator range offers continuous, and direct drive continuos rotators, as well as Heavy duty rack and pinion and continuous versions.

• For FEM Forks

  

  Our standard rotating attachment features hydraulic motor driven continuous rotation.

  The unit has high visibility dur to the drive system

  The units simplicity minimises its mass and thickness giving excellent residual capacity.